DKS 6300 VEHICULAR SWING GATE OPERATORS.
The DKS 6300 swing gate operator is designed for residential, commercial, and industrial applications for both single and dual-leaf gates. The unique design of this operator allows the gate arm to rotate from underneath the operator, creating an aesthetically pleasing installation and allowing the arm to attach to the bottom rail of the gate, were it is virtually unseen from outside the gate. This important feature does not require any unsightly cross bars to be welded to the gate, and the bottom rail is one of the strongest points on the gate. These operators are designed to be pad
Features:
Mechanical Primary Reduction: Pulley/belt driving a worm gear.
Speed: Rotates gate 90 in approximately 16-18 seconds
Frame: G90 galvanized steel to prevent rusting
Arm: Articulating arms to allow mechanical slow start / slow stop
Mounting: Pad or post mount specify which when ordering
Manual Release
Keyed padlock provided
Clutch can be back-driven to allow fail-safe release
Safety Standards Complies with the UL 325 and UL 991 safety standards
ETL listed
Advanced Features Automatic limit adjustment
Auto-close timer 1-23 seconds
Gate overlap feature for bi-parting gate operation
Includes primary and built-in secondary entrapment prevention system
Tamper protect feature
Built-in On/Off switch
Built-in alarm reset switch
Selectable shadow / reverse loop function
Magnetic lock output
Two 115 VAC convenience outlets for accessory transformers
Ports for plug-in open and reverse loop detectors.
DKS plug-in detectors only.
