DoorKing 6050 and 6100 Model Gate Operators.
D6050/6100 VEHICULAR SWING GATE OPERATORS
The DKS 6050 and 6100 swing gate operators offer convenience, reliability and quiet operation in an aesthetically pleasing design. These operators are ideally used for residential and commercial applications for both single and bi-parting gate operation. The unique design of these operators allow the gate arm to rotate from underneath the operator, creating an aesthetically pleasing installation and allowing the arm to attach to the bottom rail of the gate, where it is virtually unseen from outside the gate. This is an important feature since attaching the gate arm here does not require any unsightly cross bars to be welded to the gate and the bottom rail is one of the strongest points on the gate. These operators are designed to be pad or post mounted to meet almost any installation requirement.
Features include:
Mechanical Primary Reduction: Pulley/belt driving a worm gear
Speed: Rotates gate 90 degrees in approximately 10-12 seconds
Frame: G90 galvanized steel to prevent rusting
Arm: Articulating arms to allow mechanical slow start / slow stop
Mounting Pad or post mount specify which when ordering
Manual Release
Keyed padlock provided
Clutch can be back-driven to allow fail-safe release
Safety Standards Complies with the UL 325 and UL 991 safety standards
ETL listed
Advanced Features Automatic limit adjustment
Auto-close timer 1-23 seconds
Gate overlap feature for bi-parting gate operation
Includes primary and built-in secondary entrapment prevention system
Tamper protect feature
Built-in On/Off switch
Built-in alarm reset switch
Operator data output for connection to companion DKS access control system
Selectable shadow / reverse loop function
Magnetic lock output
Two 115 VAC convenience outlets for accessory transformers
Ports for plug-in open and reverse loop detectors.
DKS plug-in detectors only.
Operating Temp10 F to 140 F12 C to 62
Warranty 5 year limited factory warranty
